Category: Mobile

Hello Readers, CoolMonkTechie heartily welcomes you in this article (An Overview Of Property Animation In Android).

In this article, we will learn about Property Animation Overview in Android. The property animation system is a robust framework that allows us to animate almost anything. We can define an animation to change any object property over time, regardless of whether it draws to the screen. A property animation changes a property’s (a field in an object) value over a specified length of time. To animate something, we specify the object property that we want to animate, such as an object’s position on the screen, how long we want to animate it for, and what values we want to animate between. This article shows the Property Animation related concepts in Android.

A famous quote about learning is :

” Develop a passion for learning. If you do, you will never cease to grow. “

So let’s begin.

Characteristics Of Property Animation

The property animation system lets us define the following characteristics of an animation:

• Duration: We can specify the duration of an animation. The default length is 300 ms.
• Time interpolation: This specify how the values for the property calculate as a function of the animation’s current elapsed time.
• Repeat count and behavior: This specify whether to have an animation repeat when it reaches the end of a duration and how many times to repeat the animation. We can also specify whether we want the animation to play back in reverse. Setting it to reverse plays the animation forwards then, backwards repeatedly, until it reaches the number of repeats.
• Animator sets: We can group animations into logical sets that play together or sequentially or after specified delays.
• Frame refresh delay: This specify how often to refresh frames of our animation. The default is set to refresh every 10 ms, but the speed in which our application can refresh frames is ultimately dependent on how busy the system is overall and how fast the system can service the underlying timer.

The Work Flow of Property Animation

Linear Animation

First, we see how an animation works with a simple example.

In this above linear animation figure, it depicts a hypothetical object animates with its x property, which represents its horizontal location on a screen. It sets the duration of the animation to 40 ms and the distance to travel is 40 pixels. Every 10 ms, which is the default frame refresh rate, the object moves horizontally by 10 pixels. At the end of 40ms, the animation stops, and the object ends at horizontal position 40. This is an example of an animation with linear interpolation, meaning the object moves at a constant speed.

Non-Linear Animation

We can also specify animations to have a non-linear interpolation.

In this above non-linear animation figure, it illustrates a hypothetical object that speeds up at the beginning of the animation and decelerates at the end of the animation. The object still moves 40 pixels in 40 ms, but non-linearly. In the beginning, this animation accelerates up to the halfway point, then decelerates from the halfway point until the end of the animation. As this non-linear animation figure shows the distance traveled at the beginning and end of the animation is less than in the middle.

Animations Calculation Using Property Animation

We understood how the important components of the property animation system would calculate animations like the ones. Now we will discuss how the main classes work with one another.

In this figure, The ValueAnimator object keeps track of our animation’s timing, such as how long the animation has been running, and the current value of the property that it is animating.

The ValueAnimator encapsulates

• a TimeInterpolator, which defines animation interpolation, and
• a TypeEvaluator, which defines how to calculate values for the property being animated.

For example, in non-linear animation figure, the TimeInterpolator used would be AccelerateDecelerateInterpolator and the TypeEvaluator would be IntEvaluator.

To start an animation, we create a ValueAnimator and give it the starting and ending values for the property that we want to animate, along with the duration of the animation. When we call start(), the animation begins. During the whole animation, the ValueAnimator calculates an elapsed fraction between 0 and 1, based on the duration of the animation and how much time has elapsed. The elapsed fraction represents the percentage of time that the animation has completed, 0 meaning 0% and 1 meaning 100%. For example, in linear animation figure , the elapsed fraction at t = 10 ms would be .25 because the total duration is t = 40 ms.

When the ValueAnimator calculates an elapsed fraction, it calls the TimeInterpolator that is currently set to calculate an interpolated fraction. An interpolated fraction maps the elapsed fraction to a new fraction that takes into account the time interpolation that is set. For example, in non-linear animation figure, because the animation slowly accelerates, the interpolated fraction, about .15, is less than the elapsed fraction, .25, at t = 10 ms. In linear animation figure, the interpolated fraction is always the same as the elapsed fraction.

When the interpolated fraction calculates, the ValueAnimator calls the TypeEvaluator to calculate the value of the property that you are animating, based on the interpolated fraction, the starting value, and the ending value of the animation. For example, in non-linear figure, the interpolated fraction was .15 at t = 10 ms, so the value for the property would be .15 × (40 – 0), or 6.

Property Animation Vs View Animation

View Animation

” The View Animation system provides the capability to only animate View objects.”

So if we wanted to animate non-View objects, we have to implement our own code to do so.

“The View Animation system constrains because it only exposes a few aspects of a View object to animate, such as the scaling and rotation of a View but not the background color, for instance.”

“Another disadvantage of the View Animation system is that it only modified where the View drew, and not the actual View itself.”

For instance, if we animated a button to move across the screen, the button draws correctly, but the actual location where we can click the button does not change, so we have to implement our own logic to handle this.

Property Animation

“With the property animation system, these constraints removed completely, and we can animate any property of any object (Views and non-Views) and the object they modify it.”

The property animation system is also more robust in the way it carries out animation. At a high level, we assign animators to the properties that we want to animate, such as color, position, or size and can define aspects of the animation such as interpolation and synchronization of multiple animators.

The View Animation system, however, takes less time to set up and requires less code to write. If View Animation accomplishes everything that we need to do, or if our existing code already works the way we want, there is no need to use the Property Animation system. It also might make sense to use both animation systems for different situations if the use case arises.

The Main Components of Property Animation System

We can find most of the property animation system’s APIs in android.animation. Because the View Animation system already defines many interpolators in android.view.animation, we can use those interpolators in the property animation system.

The Main Components of Property Animation System are :

• Animators
• Evaluators
• Interpolators

Animators

The Animator class provides the basic structure for creating animations. We normally do not use this class directly, as it only provides minimal functionality that must be extended to fully support animating values. The following subclasses extend Animator:

• ValueAnimator
• ObjectAnimator
• AnimatorSet

ValueAnimator

The main timing engine for property animation that also computes the values for the property to be animated. It has all the core functionality that calculates animation values and contains the timing details of each animation, information about whether an animation repeats, listeners that receive update events, and the ability to set custom types to evaluate.

There are two pieces to animating properties: 

• calculating the animated values and
• setting those values on the object and property that is being animated.

 ValueAnimator does not carry out the second piece, so we must listen for updates to values calculated by the ValueAnimator and modify the objects that want to animate with our own logic.

ObjectAnimator

A subclass of ValueAnimator that allows us to set a target object and object property to animate. This class updates the property accordingly when it computes a new value for the animation.

We want to use ObjectAnimator most of the time, because it makes animating values on target objects much easier. However, we sometimes want to use ValueAnimator directly because ObjectAnimator has a few more restrictions, such as requiring specific accessor methods to be present on the target object.

AnimatorSet

This provides a mechanism to group animations together so they run in relation to one another. We can set animations to play together, sequentially, or after a specified delay. 

Evaluators

Evaluators tell the property animation system how to calculate values for a property. They take the timing data that an Animator class provides, the animation’s start and end value, and calculate the animated values of the property based on this data.

The property animation system provides the following evaluators:

• IntEvaluator: The default evaluator to calculate values for int properties.
• FloatEvaluator: The default evaluator to calculate values for float properties.
• ArgbEvaluator: The default evaluator to calculate values for color properties that represents as hexadecimal values.
• TypeEvaluator: An interface that allows us to create our own evaluator. If we are animating an object property that is not an int, float, or color, we must implement the TypeEvaluator interface to specify how to compute the object property’s animated values. We can also specify a custom TypeEvaluator for int, float, and color values, if we want to process those types differently than the default behavior.

Interpolators

A time interpolator defines how specific values in an animation are calculated as a function of time.

For example, we can specify animations to happen linearly across the whole animation, meaning the animation moves evenly the entire time, or we can specify animations to use non-linear time, for example, accelerating at the beginning and decelerating at the end of the animation.

The property animation system provides the following interpolators:

• AccelerateDecelerateInterpolator: An interpolator whose rate of change starts and ends slowly but accelerates through the middle.
• AccelerateInterpolator: An interpolator whose rate of change starts out slowly and then accelerates.
• AnticipateInterpolator: An interpolator whose change starts backward, then flings forward.
• AnticipateOvershootInterpolator: An interpolator whose change starts backward, flings forward and overshoots the target value, then finally goes back to the final value.
• BounceInterpolator: An interpolator whose change bounces at the end.
• CycleInterpolator: An interpolator whose animation repeats for a specified number of cycles.
• DecelerateInterpolator: An interpolator whose rate of change starts out quickly and then decelerates.
• LinearInterpolator: An interpolator whose rate of change is constant.
• OvershootInterpolator: An interpolator whose change flings forward and overshoots the last value then comes back.
• TimeInterpolator: An interface that allows you to implement your own interpolator.

Animate Using ValueAnimator

The ValueAnimator class lets us animate values of some type for the duration of an animation by specifying a set of int, float, or color values to animate through. We get a ValueAnimator by calling one of its factory methods: ofInt(), ofFloat(), or ofObject(). For example:

ValueAnimator.ofFloat(0f, 100f).apply {
    duration = 1000
    start()
}

In this code, the ValueAnimator calculates the values of the animation, between 0 and 100, for a duration of 1000 ms, when the start() method runs.

We can also specify a custom type to animate by doing the following code:

ValueAnimator.ofObject(MyTypeEvaluator(), startPropertyValue, endPropertyValue).apply {
    duration = 1000
    start()
}

In this code, the ValueAnimator calculates the values of the animation, between startPropertyValue and endPropertyValue using the logic supplied by MyTypeEvaluator for a duration of 1000 ms, when the start() method runs.

We can use the values of the animation by adding an AnimatorUpdateListener to the ValueAnimator object, as shown in the following code:

ValueAnimator.ofObject(...).apply {
    ...
    addUpdateListener { updatedAnimation ->
        // You can use the animated value in a property that uses the
        // same type as the animation. In this case, you can use the
        // float value in the translationX property.
        textView.translationX = updatedAnimation.animatedValue as Float
    }
    ...
}

In the onAnimationUpdate() method, we can access the updated animation value and use it in a property of one of our views.

Animate Using ObjectAnimator

The ObjectAnimator is a subclass of the ValueAnimator and combines the timing engine and value computation of ValueAnimator with the ability to animate a named property of a target object. This makes animating any object much easier, as we no longer need to implement the ValueAnimator.AnimatorUpdateListener, because the animated property updates automatically.

Instantiating an ObjectAnimator is like a ValueAnimator, but we also specify the object and the name of that object’s property (as a String) along with the values to animate between:

ObjectAnimator.ofFloat(textView, "translationX", 100f).apply {
    duration = 1000
    start()
}

To have the ObjectAnimator update properties correctly, we must do the following steps:

• The object property that we are animating must have a setter function (in camel case) in the form ofset<PropertyName>(). Because the ObjectAnimator automatically updates the property during animation, it must be able to access the property with this setter method. For example, if the property name is foo, we need to have a setFoo() method. If this setter method does not exist, we have three options:
  • Add the setter method to the class if we have the rights to do so.
  • Use a wrapper class that we have rights to change and have that wrapper receive the value with a valid setter method and forward it to the original object.
  • Use ValueAnimator instead.

• If we specify only one value for the values... parameter in one of the ObjectAnimator factory methods, we assume it to be the ending value of the animation. Therefore, the object property that we are animating must have a getter function that is used to get the starting value of the animation. The getter function must be in the form of get<PropertyName>(). For example, if the property name is foo, we need to have a getFoo() method.
• The getter and setter methods of the property that we are animating must operate on the same type as the starting and ending values that specify to ObjectAnimator. For example, we must have targetObject.setPropName(float) and targetObject.getPropName() if we construct the following ObjectAnimator:

ObjectAnimator.ofFloat(targetObject, "propName", 1f)

• Depending on what property or object we are animating, we might need to call the invalidate() method on a View to force the screen to redraw itself with the updated animated values. We do this in the onAnimationUpdate() callback.

Animate Using AnimatorSet

In many cases, we want to play an animation that depends on when another animation starts or finishes. The Android system lets us bundle animations together into an AnimatorSet, so that we can specify whether to start animations simultaneously, sequentially, or after a specified delay. We can also nest AnimatorSet objects within each other.

val bouncer = AnimatorSet().apply {
    play(bounceAnim).before(squashAnim1)
    play(squashAnim1).with(squashAnim2)
    play(squashAnim1).with(stretchAnim1)
    play(squashAnim1).with(stretchAnim2)
    play(bounceBackAnim).after(stretchAnim2)
}
val fadeAnim = ObjectAnimator.ofFloat(newBall, "alpha", 1f, 0f).apply {
    duration = 250
}
AnimatorSet().apply {
    play(bouncer).before(fadeAnim)
    start()
}

In this code snippet, the following Animator objects in the following manner :

• Plays bounceAnim.
• Plays squashAnim1, squashAnim2, stretchAnim1, and stretchAnim2 at the same time.
• Plays bounceBackAnim.
• Plays fadeAnim.

Animation Listeners

We can listen for important events during an animation’s duration with the listeners described below.

• Animator.AnimatorListener
• ValueAnimator.AnimatorUpdateListener

Animator.AnimatorListener

• onAnimationStart() : This method called when the animation starts.
• onAnimationEnd(): This called when the animation ends.
• onAnimationRepeat(): This method called when the animation repeats itself.
• onAnimationCancel(): Called when the animation is canceled. A cancelled animation also calls onAnimationEnd(), regardless of how they were ended.

ValueAnimator.AnimatorUpdateListener

onAnimationUpdate(): This method called on every frame of the animation. Listen to this event to use the calculated values generated by ValueAnimator during an animation.

Animate Layout Changes to ViewGroup Objects

The property animation system provides the capability to animate changes to ViewGroup objects as well as provide an easy way to animate View objects themselves.

We can animate layout changes within a ViewGroup with the LayoutTransition class. Views inside a ViewGroup can go through an appearing and disappearing animation when we add them to or remove them from a ViewGroup or when we call a View’s setVisibility() method with VISIBLE, INVISIBLE, or GONE. The remaining Views in the ViewGroup can also animate into their new positions when we add or remove Views.

We can define the following animations in a LayoutTransition object by calling setAnimator() and passing in an Animator object with one of the following LayoutTransition constants:

• APPEARING : This flag indicating the animation that runs on items that are appearing in the container.
• CHANGE_APPEARING : A flag indicating the animation that runs on items that are changing due to a new item appearing in the container.
• DISAPPEARING : This flag indicating the animation that runs on items that are disappearing from the container.
• CHANGE_DISAPPEARING : A flag indicating the animation that runs on items that are changing due to an item disappearing from the container.

Animate View State Changes Using StateListAnimator

The StateListAnimator class lets us define animators that run when the state of a view changes. This object behaves as a wrapper for an Animator object, calling that animation whenever the specified view state (such as “pressed” or “focused”) changes.

The StateListAnimator can be defined in an XML resource with a root <selector> element and child <item> elements that each specify a different view state defined by the StateListAnimator class. Each <item> contains the definition for a property animation set.

For example, the following file creates a state list animator that changes the x and y scale of the view when it’s pressed:

res/xml/animate_scale.xml

<?xml version="1.0" encoding="utf-8"?>
<selector xmlns:android="http://schemas.android.com/apk/res/android">
    <!-- the pressed state; increase x and y size to 150% -->
    <item android:state_pressed="true">
        <set>
            <objectAnimator android:propertyName="scaleX"
                android:duration="@android:integer/config_shortAnimTime"
                android:valueTo="1.5"
                android:valueType="floatType"/>
            <objectAnimator android:propertyName="scaleY"
                android:duration="@android:integer/config_shortAnimTime"
                android:valueTo="1.5"
                android:valueType="floatType"/>
        </set>
    </item>
    <!-- the default, non-pressed state; set x and y size to 100% -->
    <item android:state_pressed="false">
        <set>
            <objectAnimator android:propertyName="scaleX"
                android:duration="@android:integer/config_shortAnimTime"
                android:valueTo="1"
                android:valueType="floatType"/>
            <objectAnimator android:propertyName="scaleY"
                android:duration="@android:integer/config_shortAnimTime"
                android:valueTo="1"
                android:valueType="floatType"/>
        </set>
    </item>
</selector>

To attach the state list animator to a view, add the android:stateListAnimator attribute as follows:

<Button android:stateListAnimator="@xml/animate_scale"
        ... />

Now the animations defined in animate_scale.xml are used when this button’s state changes.

Or, to instead assign a state list animator to a view in our code, use the AnimatorInflater.loadStateListAnimator() method, and assign the animator to our view with the View.setStateListAnimator() method.

Use a TypeEvaluator

If we want to animate a type unknown to the Android system, we can create our own evaluator by implementing the TypeEvaluator interface. The types that are known by the Android system are int, float, or a color, which are supported by the IntEvaluator, FloatEvaluator, and ArgbEvaluator type evaluators.

There is only one method to implement in the TypeEvaluator interface, the evaluate() method. This allows the animator that we are using to return an appropriate value for our animated property at the current point of the animation. The FloatEvaluator class shows how to do this:

private class FloatEvaluator : TypeEvaluator<Any> {

    override fun evaluate(fraction: Float, startValue: Any, endValue: Any): Any {
        return (startValue as Number).toFloat().let { startFloat ->
            startFloat + fraction * ((endValue as Number).toFloat() - startFloat)
        }
    }

}

Use Interpolators

An interpolator define how calculate specific values in an animation as a function of time. For example, we can specify animations to happen linearly across the whole animation, meaning the animation moves evenly the entire time, or we can specify animations to use non-linear time, for example, using acceleration or deceleration at the beginning or end of the animation.

Interpolators in the animation system receive a fraction from Animators that represent the elapsed time of the animation. Interpolators modify this fraction to coincide with the type of animation that it aims to provide. The Android system provides a set of common interpolators in the android.view.animation package. If none of these suit our needs, we can implement the TimeInterpolator interface and create our own.

For example, we will see that how to compare the default interpolator AccelerateDecelerateInterpolator and the LinearInterpolator that calculates interpolated fractions. The LinearInterpolator has no effect on the elapsed fraction. The AccelerateDecelerateInterpolator accelerates into the animation and decelerates out of it.

AccelerateDecelerateInterpolator

override fun getInterpolation(input: Float): Float =
        (Math.cos((input + 1) * Math.PI) / 2.0f).toFloat() + 0.5f

LinearInterpolator

override fun getInterpolation(input: Float): Float = input

Specify Keyframes

A Keyframe object consists of a time/value pair that lets us define a specific state at a specific time of an animation. Each keyframe can also have its own interpolator to control the behavior of the animation in the interval between the previous keyframe’s time and the time of this keyframe.

To instantiate a Keyframe object, we must use one of the factory methods, ofInt(), ofFloat(), or ofObject() to get the appropriate type of Keyframe. We then call the ofKeyframe() factory method to get a PropertyValuesHolder object. Once we have the object, we can get an animator by passing in the PropertyValuesHolder object and the object to animate. 

val kf0 = Keyframe.ofFloat(0f, 0f)
val kf1 = Keyframe.ofFloat(.5f, 360f)
val kf2 = Keyframe.ofFloat(1f, 0f)
val pvhRotation = PropertyValuesHolder.ofKeyframe("rotation", kf0, kf1, kf2)
ObjectAnimator.ofPropertyValuesHolder(target, pvhRotation).apply {
    duration = 5000
}

Animate Views

The Property Animation system allows streamlined animation of View objects and offers a few advantages over the view animation system. The View Animation system transformed View objects by changing the way that they were drawn. This was handled in the container of each View, because the View itself had no properties to manipulate. This resulted in the View being animated, but caused no change in the View object itself. This led to behavior such as an object still existing in its original location, even though it was drawn on a different location on the screen.

The property animation system can animate Views on the screen by changing the actual properties in the View objects. In addition, Views also automatically calls the invalidate() method to refresh the screen whenever its properties are changed. The new properties in the View class that facilitate property animations are:

• translationX and translationY: These properties control where the View is located as a delta from its left and top coordinates, which are set by its layout container.
• rotation, rotationX, and rotationY: These properties control the rotation in 2D (rotation property) and 3D around the pivot point.
• scaleX and scaleY: These properties control the 2D scaling of a View around its pivot point.
• pivotX and pivotY: These properties control the location of the pivot point, around which the rotation and scaling transforms occur. By default, the pivot point is located at the center of the object.
• x and y: These are simple utility properties to describe the final location of the View in its container, as a sum of the left and top values and translationX and translationY values.
• alpha: Represents the alpha transparency on the View. This value is 1 (opaque) by default, with a value of 0 representing full transparency (not visible).

To animate a property of a View object, such as its color or rotation value, all we need to do is create a property animator and specify the View property that we want to animate. For example:

ObjectAnimator.ofFloat(myView, "rotation", 0f, 360f)

Animate Using ViewPropertyAnimator

The ViewPropertyAnimator provides a simple way to animate several properties of a View in parallel, using a single underlying Animator object. It behaves much like an ObjectAnimator, because it modifies the actual values of the view’s properties, but is more efficient when animating many properties at once. In addition, the code for using the ViewPropertyAnimator is much more concise and easier to read.

The following code snippets show the differences in using multiple ObjectAnimator objects, a single ObjectAnimator, and the ViewPropertyAnimator when simultaneously animating the x and y property of a view.

Multiple ObjectAnimator objects

val animX = ObjectAnimator.ofFloat(myView, "x", 50f)
val animY = ObjectAnimator.ofFloat(myView, "y", 100f)
AnimatorSet().apply {
    playTogether(animX, animY)
    start()
}

One ObjectAnimator

val pvhX = PropertyValuesHolder.ofFloat("x", 50f)
val pvhY = PropertyValuesHolder.ofFloat("y", 100f)
ObjectAnimator.ofPropertyValuesHolder(myView, pvhX, pvhY).start()

ViewPropertyAnimator

myView.animate().x(50f).y(100f)

Declare Animations in XML

The property animation system lets us declare property animations with XML instead of doing it programmatically. By defining our animations in XML, we can easily reuse our animations in multiple activities and more easily edit the animation sequence.

The following property animation classes have XML declaration support with the following XML tags:

ValueAnimator - <animator>
ObjectAnimator - <objectAnimator>
AnimatorSet - <set>

The following example plays the two sets of object animations sequentially, with the first nested set playing two object animations together:

<set android:ordering="sequentially">
    <set>
        <objectAnimator
            android:propertyName="x"
            android:duration="500"
            android:valueTo="400"
            android:valueType="intType"/>
        <objectAnimator
            android:propertyName="y"
            android:duration="500"
            android:valueTo="300"
            android:valueType="intType"/>
    </set>
    <objectAnimator
        android:propertyName="alpha"
        android:duration="500"
        android:valueTo="1f"/>
</set>

In order to run this animation, we must inflate the XML resources in our code to an AnimatorSet object, and then set the target objects for all of the animations before starting the animation set. Calling setTarget() sets a single target object for all children of the AnimatorSet as a convenience.

(AnimatorInflater.loadAnimator(myContext, R.animator.property_animator) as AnimatorSet).apply {
    setTarget(myObject)
    start()
}

We can also declare a ValueAnimator in XML, as shown in the following example:

<animator xmlns:android="http://schemas.android.com/apk/res/android"
    android:duration="1000"
    android:valueType="floatType"
    android:valueFrom="0f"
    android:valueTo="-100f" />

To use the previous ValueAnimator in our code, we must inflate the object, add an AnimatorUpdateListener, get the updated animation value, and use it in a property of one of our views, as shown in the following code:

(AnimatorInflater.loadAnimator(this, R.animator.animator) as ValueAnimator).apply {
    addUpdateListener { updatedAnimation ->
        textView.translationX = updatedAnimation.animatedValue as Float
    }

    start()
}

That’s all about in this article.

Related Other Articles / Posts

• Android – The Most Popular Best Ways To Add Motion To UI
• Android – How To Animate Drawable Graphics In Android ?

Conclusion

In this article, we understood about Property Animation Overview in Android. This article described about Property Animation related concepts like Workflow, benefits, Animates View using ValueAnimator, ObjectAnimator and AnimatorSet in Android.

Thanks for reading! I hope you enjoyed and learned about Property Animation concepts in Android. Reading is one thing, but the only way to master it is to do it yourself.

Please follow and subscribe to the blog and support us in any way possible. Also like and share the article with others for spread valuable knowledge.

You can find Other articles of CoolMonkTechie as below link :

• Android Articles
• CoolMonkTechie Home Page

You can also follow official website and tutorials of Android as below links :

• Android Developers

If you have any comments, questions, or think I missed something, leave them below in the comment box.

Thanks again Reading. HAPPY READING !!???